China Zlyj Plastic Extruder Gearbox for Extruder Machine gearbox engine

Item Description

one) Modest quantity
2) Huge transmission torque
3) Substantial effectiveness
four) Lower intake

About gearbox :
ZLYJ gearbox sequence are transmission gadgets, which are specially created for solitary-screw extruder with higher precision, difficult gear floor, accompany with thrust. Adopting the technical specs stipulated in JB/T9050.1-1999, all CZPT gearboxes are created accordingly.
Main Characteristics:
one. The substance of equipment is the large toughness alloy metal, it is created by carburizing, quenching (and other heat therapy), gringding procedure at last. The gear is in substantial precison ( 6 grade ) and high hardness ( reaches HRC54-sixty two). Apart from, it characteristics low noise when running.
2. It consists of higher bearing capacity thrust, which is executed reliable and can face up to greater axial thrust.
3. All the objects are dealt with by forced lubrication and cooling method other than quite number of tiny specification goods.
four. CZPT series gearbox is adopted by six-facet processing box. Its standard installation is horizontal, but can also be altered to vertical installation in accordance to customer’s requirment.
five. Efficiency transmission, lower sound, prolonged operaton time.

Main technicl parameters :

Type Spec Input Energy(kw) N( enter) N(output) Output Torque Permitted axial thrust of output shaft(KN) Screw Diameter Length-diameter ratio
(N@m)
ZLYJ 112-8 five.5 800 a hundred 525 35 Ø35 twenty five:01:00
133-8 8 800 a hundred 764 39 Ø50 twenty five:01:00
146-ten eleven a thousand one hundred 1050 54 Ø55 twenty five:01:00
173-10 eighteen.five 900 90 1962 one hundred ten Ø65 twenty five:01:00
two hundred-twelve.five 30 1000 80 3581 a hundred and fifty five Ø75 25:01:00
225-12.five forty five one thousand 80 5371 one hundred eighty Ø90 twenty five:01:00
250-16 55 1120 70 7503 192 Ø105 twenty five:01:00
280-sixteen seventy five 960 60 7643 258 Ø110 twenty five:01:00
315-sixteen eighty five 960 sixty 13528 287 Ø120 25:01:00
330-16 110 960 60 17507 360 Ø135 25:01:00
375-16 132 960 sixty 21008 390 Ø150 twenty five:01:00
395-sixteen 185 960 60 29442 four hundred Ø160 twenty five:01:00
420-sixteen one hundred sixty 960 sixty 31831 430 Ø160 twenty five:01:00
420-16 220 960 sixty 31831 430 Ø170 25:01:00
450-20 213 a thousand sixty 40640 five hundred Ø160/Ø170 25:01:00
560-seventeen 540 1000 fifty 84034 seven-hundred Ø200 twenty five:01:00
630-10 540 a thousand fifty 15712 770 Ø250 twenty five:01:00

Why select us?
A> lengthy time expertise and history
B> extended time nitriding treatment and heating remedy by alone
C>advanced Fanuk series CNC computer-controlled milling machines
D>depth hole drilling device in 18meters length, which ensure the straigtnss of barrel within.
E> CAD drawing affirmation just before start generating
F> Prompt right after sale provider
G>Land owner and registration cash 25, 000, 000RMB

About our organization :

ZHangZhoug pinbo plastic machinery co.,ltd is located in HangZhou HangZhou city 
with brand of PYM(Former HangZhou yumin machine screw co.ltd since 1988). The company is specialized in making screw barrel, gearbox zlyj series,
 t die, filter and extruder machine. It has become one of the largest
 supplier of main parts in HangZhou city which is the basement of plastic 
equipment.

Ready for your inquiry ! Welcome to our company .
 


/ Piece
|
1 Piece

(Min. Order)

###

Application: Reducer
Hardness: Hardened
Type: Bevel Gear
Brand Name: Pym
Input Speed: 800
Output Torque: 525

###

Customization:
Available

|


###

Type Spec Input Power(kw) N( enter) N(output) Output Torque Permitted axial thrust of output shaft(KN) Screw Diameter Length-diameter ratio
(N@m)
ZLYJ 112-8 5.5 800 100 525 35 Ø35 25:01:00
133-8 8 800 100 764 39 Ø50 25:01:00
146-10 11 1000 100 1050 54 Ø55 25:01:00
173-10 18.5 900 90 1962 110 Ø65 25:01:00
200-12.5 30 1000 80 3581 155 Ø75 25:01:00
225-12.5 45 1000 80 5371 180 Ø90 25:01:00
250-16 55 1120 70 7503 192 Ø105 25:01:00
280-16 75 960 60 7643 258 Ø110 25:01:00
315-16 85 960 60 13528 287 Ø120 25:01:00
330-16 110 960 60 17507 360 Ø135 25:01:00
375-16 132 960 60 21008 390 Ø150 25:01:00
395-16 185 960 60 29442 400 Ø160 25:01:00
420-16 160 960 60 31831 430 Ø160 25:01:00
420-16 220 960 60 31831 430 Ø170 25:01:00
450-20 213 1000 60 40640 500 Ø160/Ø170 25:01:00
560-17 540 1000 50 84034 700 Ø200 25:01:00
630-10 540 1000 50 103132 770 Ø250 25:01:00

/ Piece
|
1 Piece

(Min. Order)

###

Application: Reducer
Hardness: Hardened
Type: Bevel Gear
Brand Name: Pym
Input Speed: 800
Output Torque: 525

###

Customization:
Available

|


###

Type Spec Input Power(kw) N( enter) N(output) Output Torque Permitted axial thrust of output shaft(KN) Screw Diameter Length-diameter ratio
(N@m)
ZLYJ 112-8 5.5 800 100 525 35 Ø35 25:01:00
133-8 8 800 100 764 39 Ø50 25:01:00
146-10 11 1000 100 1050 54 Ø55 25:01:00
173-10 18.5 900 90 1962 110 Ø65 25:01:00
200-12.5 30 1000 80 3581 155 Ø75 25:01:00
225-12.5 45 1000 80 5371 180 Ø90 25:01:00
250-16 55 1120 70 7503 192 Ø105 25:01:00
280-16 75 960 60 7643 258 Ø110 25:01:00
315-16 85 960 60 13528 287 Ø120 25:01:00
330-16 110 960 60 17507 360 Ø135 25:01:00
375-16 132 960 60 21008 390 Ø150 25:01:00
395-16 185 960 60 29442 400 Ø160 25:01:00
420-16 160 960 60 31831 430 Ø160 25:01:00
420-16 220 960 60 31831 430 Ø170 25:01:00
450-20 213 1000 60 40640 500 Ø160/Ø170 25:01:00
560-17 540 1000 50 84034 700 Ø200 25:01:00
630-10 540 1000 50 103132 770 Ø250 25:01:00

What Is a Gearbox?

A gearbox is the mechanical system of an automobile that allows a vehicle to change gear smoothly. This arrangement of gears is highly complex, which helps to provide a smooth gear change. In this article, we will explore some of the different types of gearboxes, including the Epicyclic gearbox, the Coaxial helical gearbox, and the Extruder helical gearing. These are three of the most common types of gearboxes used in automobiles.
gearbox

Gearboxes

Gearboxes help drivers choose the appropriate gear for the conditions. A lower gear produces the least speed, while a higher gear gives the maximum torque. The number of gears used in a gearbox varies to meet different demands on the road and load. Short gearing provides maximum torque, while tall gearing offers higher top speeds. These features combine to improve the driveability of a vehicle. But what is a gearbox?
The gearbox has a slew of components, including the bearings and seals. Among these components is the gearbox, which is subjected to wear and tear due to metal-to-metal contact. As a result, gearboxes require close monitoring. Various tests are used to assess the condition of gears, such as corrosion and wear. Proactive tests emphasize wear, contamination, and oil condition. However, there are also proactive tests, such as the ferrous density test and the AN test, which monitor additive depletion and abnormal wear.
The separating force is a key factor for the design of a gearbox. The primary radial measurement point should be oriented to monitor normal forces. The secondary measurement point should be located in the opposite direction of rotation from the primary radial measurement point. The separating force generated by a helical gear set is called tangential force. The primary and secondary radial measurement points should be positioned so as to provide information about both normal and tangential forces.
Manual gearboxes are often manual. The driver can control the synchromesh by using a selector rod. This rod moves the synchromesh to engage the gear. Reverse gears are not synchromesh because they are used only when the vehicle is at a standstill. In older cars, the first gear often lacked synchromesh due to cost or lack of torque. Drivers could still use first gear with a double-declutch.

Coaxial helical gearbox

The R series rigid tooth flank helical gearbox features high versatility and good combination. They have a wide range of motor power and allow for fine classification of transmission ratios. The R series gearbox has several advantages, including high efficiency, long service life, and low vibration. This series of gearbox can be combined with a wide range of reducers and variators. Its size and high performance makes it an ideal choice for applications that require maximum torque and load transfer.
The main feature of a helical gearbox is that it presents a fixed velocity ratio, even if the center gaps are not perfectly set. This is sometimes referred to as the fundamental rule of gearing. A helical gearbox is similar to paper spur gears in terms of radial pitch, since the shafts in the helical gearbox cross at an angle. The center gap of a helical gearbox is the same for both the left and right-handed counterparts.
The EP Series is another popular model of a Coaxial helical gearbox. This series has high torque and a maximum reduction ratio of 25.6:1. It is an ideal choice for the plastic industry, and CZPT offers an extensive range of models. Their center distance ranges from 112 mm to 450 mm. The EP Series has several models with different center distances. In addition to high torque and efficiency, this gearbox has low noise and vibration, and it is easy to assemble and disassemble.
Another type of Coaxial helical gearboxes is the planetary gearbox. They have a high efficiency and power density. Unlike coaxial helical gearboxes, planetary gearboxes have an axis on the same direction as the output shaft. They are easy to integrate into existing drive trains. In addition, they are compact and easy to integrate with existing drive trains. For servo applications, they are another great choice.
gearbox

Epicyclic gearbox

An epicyclic gearbox is a type of automatic gearbox used to drive cars. Its primary advantage is its compact design, and it is more reliable and efficient than manual gearboxes. It is comprised of a sun gear and two planetary gears, encased in a ring gear called the Annulus. This system is useful for drivers who need to shift gears frequently, as they will become tired if the gears are suddenly changed.
An epicyclic gearbox consists of three different types of gears: ring gear, sun gear, and annular ring gear. The ring gear is the outermost gear and has angular-cut teeth on its inner surface. It is used in conjunction with planetary gears to provide high-speed ratios to vehicles. The sun gear also reverses the direction of the output shaft. This helps reduce transmission error.
An epicyclic gearbox uses multiple planets to transfer power between the planets. This type of gearbox is lightweight and features a high power density. This gearbox has several benefits over a standard single-stage parallel axis gearbox, including multiple load paths, unequal load sharing, and phased meshing. Furthermore, epicyclic gearboxes require more complex transmission error optimisation than their counterparts, including more than one stage.
The objective of epicyclic gearbox research is to provide the lowest transmission error possible. The process includes an initial design and detailed specification. The system is defined by its load spectrum and required ratio. Deflections of the elastic mesh are calculated to understand their strength and how much energy the system can handle. Finally, micro-geometric corrections minimize transmission error. These improvements are crucial to the overall efficiency of an epicyclic gearbox.

Extruder helical gearing

The helix in an extruder helical gearing is fixed at an angle, enabling more interaction with the shaft in the same direction as it moves. As a result, the shaft and the bearing are in constant contact for a long period of time. Typically, extruder helical gearing is used in applications where there is low excitement, such as steel, rolling mills, conveyors, and the oil industry. The bevel gear train also plays a role in these applications.
The CZPT AEX extruder drive gear is specifically developed for this specific application. The gears are compact and lightweight and offer exceptional power density and a long service life. These extruder gears are highly reliable, and they can be used in a wide range of applications, including rubber processing, food production, and recycling plants. CZPT offers both standard and custom gearing for your extruder.
Another advantage of helical gearing is its versatility. Since the helical gearing teeth are inclined at a specific angle, they can be adjusted to meet the specific needs of a given application. These gears also have the advantage of eliminating noise and shock from straight teeth. Unlike other gearing types, they are able to achieve a wide range of loads, from small to large. These helical gears are very durable and are the best option for high-load applications.
In addition to this, asymmetric helical gears have increased flexibility, while asymmetrical helical gears have lower flexural stiffness. The ratio of teeth to the shaft has a positive effect on the strength of the gear. Furthermore, asymmetrical helical gears are easier to manufacture. But before you purchase your next extruder gear, make sure you know what you’re getting into.
gearbox

1 speed gearbox

CZPT Group Components produces the one speed gearbox. It has the potential to make cars more efficient and environmentally friendly. The gear ratio of a car’s drivetrain is crucial for reaching maximum power and speed. Typically, a one-speed gearbox delivers a maximum of 200 hp. But the speed at which a car can reach this power must be high to get the full benefit from the electric motor. So, how can a one-speed gearbox improve the speed and torque of a car?
A one-speed gearbox is a mechanical device used to switch between second and third gears. It can include multiple gear sets, such as a shared middle gear for switching between second and third gears. It can also have an intermediate gear set that represents a switchable gear in both partial transmissions. The invention also includes a mechanism that makes it easier to change gears. The patent claims are detailed below. A typical one-speed gearbox may include two parts.
Generally, a one-speed gearbox will have up to seven forward gears, with each of these corresponding to a different speed. A one-speed gearbox can have five different gear sets and five different gear levels. It can have synchronized gear sets or last-shelf gear sets. In either case, the gears are arranged in a way that maximizes their efficiency. If the gears are placed on opposite sides of a car, the transmission may be a two-speed one.
CZPT Transmission specializes in the production of high-speed gearboxes. The company’s Milltronics HBM110XT gearbox machine is the perfect tool for this job. This machine has a large working table and a heavy-duty load capacity, making it a versatile option for many kinds of applications. There are also a wide variety of CZPT gearboxes for the automotive industry.

China Zlyj Plastic Extruder Gearbox for Extruder Machine     gearbox engineChina Zlyj Plastic Extruder Gearbox for Extruder Machine     gearbox engine
editor by CX 2023-04-18