Product Description
Planetary Gearbox AB Series Square Flange Helical Bevel Planetary Transmission Gearboxes Servo Motor
Product Overview:
Precision planetary gear reducer is another name for planetary gear reducer in the industry. Its main transmission structure is planetary gear, sun gear and inner gear ring.
Compared with other gear reducers, precision planetary gear reducers have the characteristics of high rigidity, high precision (single stage can achieve less than 1 point), high transmission efficiency (single stage can achieve 97% – 98%), high torque/volume ratio, lifelong maintenance-free, etc. Most of them are installed on stepper motor and servo motor to reduce speed, improve torque and match inertia.
AB series precision planetary gear box reducer AB60/90/115/142/180/220
features:
AB-series reducer features:
1. Helical gear design The reduction mechanism adopts the helical gear design, and its tooth shape meshing rate is more than twice that of the general spur gear, and has the characteristics of smooth operation, low noise, high output torque and low backlash
2. Collet type locking mechanism The connection between the input end and the motor adopts a collet-type locking mechanism and undergoes dynamic balance analysis to ensure the concentricity of the joint interface and zero-backlash power transmission at high input speeds
3. Modular design of motor connection board The unique modular design of the motor connecting plate and shaft is suitable for any brand and type of servo motor;
4. Efficient surface treatment technology The surface of the gearbox is treated with electroless nickel, and the connecting plate of the motor is treated with black anodic treatment to improve the environmental tolerance and corrosion resistance
5. One-piece gearbox body The gearbox and the inner ring gear adopt an integrated design, with compact structure, high precision and large output torque
6. Accurate concentricity of gear bar The sun gear made of the whole gear bar has strong rigidity and accurate concentricity
7. Solid, Single piece sun gear construction obtains precise concentricity with increased strength and rigidity. 8.Precision taper roller bearing support to increases radial and axial loading capacity.
Our Advantages
SERIES: AB/ ABR/ AD/ADS/ ADR/ AF/ AFR/ AFX/ AFXR/ AE/ AER/ AE/ AERS
PLF series, PLE series, ZPLF series, ZPLE series, AB series, ABR series and many other models are available.
Product Description
Planetary Gearbox AB Series Square Flange Helical Bevel Planetary Transmission Gearboxes Servo Motor
Advantages of the planetary gearbox:
Low backlash
High Efficiency
High Torque
High Input Speed
High Stability
High Reduction Ratio
Product Parameters
|
Name |
High Precision Planetary Gearbox |
|
Model |
AB042, AB060, AB060A, AB090A, AB115, AB142, AB180, AB220 |
|
Gearing Arrangement |
Planetary |
|
Effeiency withfull load |
≥97 |
|
Backlash |
≤5 |
|
Weight |
0.5~48kg |
|
Gear Type |
Helical Gear |
|
Gear stages |
1 stage, 2 stage |
|
Rated Torque |
14N.m-2000N.m |
|
Gear Ratio One-stage |
3, 4, 5, 6, 7, 8, 9, 10 |
|
Gear Ratio Two-stage |
15, 20, 25, 30, 35, 40, 45, 50, 60, 70, 80, 90, 100 |
|
Mounting Position |
Horizontal (foot mounted) or Vertical (flange mounted) |
|
Usage |
stepper motor, servo motor, AC motor, DC motor, etc |
Applications
Company Profile
Certifications
Packaging & Shipping
/* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1
| Hardness: | Hardened Tooth Surface |
|---|---|
| Installation: | Vertical Type |
| Layout: | Coaxial |
| Gear Shape: | Planetary |
| Step: | Single-Step |
| Type: | Ab Series Gearbox, Gear Reducer |
| Samples: |
US$ 100/Piece
1 Piece(Min.Order) | |
|---|
Contribution of Speed Reducer Gearboxes to Energy Efficiency in Machinery
Speed reducer gearboxes play a significant role in enhancing energy efficiency across various industrial applications. Their contributions are as follows:
- Optimized Power Transmission: Speed reducer gearboxes efficiently transfer power from input to output shafts, ensuring minimal energy loss during transmission. By reducing unnecessary friction and minimizing internal losses, these gearboxes maximize power delivery to the intended machinery.
- Torque Amplification: Speed reducers increase torque while reducing rotational speed. This allows larger loads to be moved with less power input, resulting in improved efficiency and reduced energy consumption.
- Variable Speed Control: Some speed reducer gearboxes offer adjustable speed settings, enabling machinery to operate at the most energy-efficient speed for a given task. This feature is especially beneficial in applications with varying load requirements.
- Optimized Motion Profiles: Speed reducer gearboxes help achieve smoother and controlled motion in machinery. By minimizing jerky movements and vibrations, energy waste due to sudden accelerations and decelerations is reduced.
- Reduced Heat Generation: Efficient speed reduction leads to lower heat generation within gearboxes, resulting in decreased energy loss due to heat dissipation. This is particularly important in applications that involve continuous operation.
- Mechanical Advantage: Speed reducers provide mechanical advantage, allowing equipment to perform tasks more easily and efficiently. This can lead to decreased wear and tear on machinery components and, consequently, reduced energy consumption.
Overall, speed reducer gearboxes contribute to energy efficiency by optimizing power transmission, reducing losses, enhancing torque delivery, and enabling precise control over machinery speed and motion. Their inclusion in various industrial setups helps lower energy consumption, operational costs, and environmental impact.
Factors to Consider When Selecting the Right Speed Reducer Gearbox
Choosing the appropriate speed reducer gearbox for an application involves considering several key factors to ensure optimal performance and efficiency. Here are the factors to take into account:
Torque and Speed Requirements: Determine the required torque output and speed reduction or increase for your specific application. Select a gearbox that can handle the desired torque and provide the necessary speed output.
Ratio: The gear ratio determines the relationship between input and output speeds. Choose a gearbox with the appropriate gear ratio to achieve the desired speed reduction or increase.
Efficiency: Consider the efficiency of the gearbox, as higher efficiency results in less energy loss and heat generation. Choose a gearbox with a high efficiency rating for improved energy savings.
Load Type: Identify whether the application involves constant, intermittent, or shock loads. Different gearbox designs are better suited for specific load types.
Space and Mounting Constraints: Evaluate the available space for installing the gearbox and ensure that the selected design fits within the allotted area. Consider mounting options and alignment requirements.
Environmental Conditions: Take into account factors such as temperature, humidity, dust, and corrosive environments. Choose a gearbox with appropriate sealing and protection to withstand the operating conditions.
Service Life and Maintenance: Consider the expected service life of the gearbox and its maintenance requirements. Select a gearbox with durable components and minimal maintenance needs.
Backlash: Backlash refers to the amount of play or clearance between gear teeth. Depending on the application’s precision requirements, choose a gearbox with low backlash for accurate motion control.
Noise and Vibration: Some applications require low noise and vibration levels. Choose a gearbox with features to minimize noise and vibration if necessary.
Cost: Factor in the cost of the gearbox and its long-term operational expenses. Balance the initial investment with the expected benefits and performance improvements.
Compatibility: Ensure that the gearbox is compatible with the existing components and systems in your application.
Manufacturer and Supplier: Choose a reputable manufacturer or supplier with a track record of delivering high-quality, reliable gearboxes.
By carefully considering these factors, you can select the right speed reducer gearbox that meets the specific requirements of your application, ensuring efficient and reliable operation.
What is a Speed Reducer Gearbox and How Does It Function in Mechanical Systems?
A speed reducer gearbox, also known as a gear reducer or gearhead, is a mechanical device used to reduce the rotational speed of an input shaft while increasing the output torque. It consists of a combination of gears with different sizes and configurations that work together to achieve the desired speed reduction and torque increase.
The primary function of a speed reducer gearbox is to adapt the output speed and torque of a power source, such as an electric motor or an internal combustion engine, to match the requirements of a specific application. By changing the speed and torque characteristics, the gearbox enables efficient power transmission and motion control in various industrial and mechanical systems.
The basic operation of a speed reducer gearbox involves the interaction of different types of gears, such as spur gears, helical gears, bevel gears, and worm gears. These gears mesh together to create a mechanical advantage, which results in the reduction of output speed and the amplification of output torque. The specific gear arrangement and ratios determine the extent of speed reduction and torque multiplication achieved by the gearbox.
Speed reducer gearboxes find widespread use in applications where the input power source operates at higher speeds and lower torques than what is required for the output application. Examples include conveyor systems, industrial machinery, robotics, automotive transmissions, and various types of manufacturing equipment. By providing the necessary speed reduction and torque increase, speed reducer gearboxes play a crucial role in optimizing the performance and efficiency of these mechanical systems.
In summary, a speed reducer gearbox is a mechanical component that utilizes gear combinations to reduce input speed and increase output torque, enabling effective power transmission and motion control in a wide range of industrial applications.
editor by CX 2024-05-17
China wholesaler Desboer NF180 High Torque Planetary Gearbox Speed Reducer Gear Box for Motor Transmission Reduction Gearbox with Great quality
Product Description
Product Description
The NF180 series planetary gearboxes are designed and machined as a single unit with special tapered roller bearings to provide high radial load, high torque, ultra-precision, and small size. The ND series uses in highly rigid industries such as fiber optic laser equipment, floor track equipment, robot seventh axis, Parallel robots (spider hand) machine tools, and rotating arms.
Product Name: High Precision Planetary Reducer
Product Series: NF180 Series
Product features: high torque, high load, ultra-precision, small size
Product Description:
Integrated design concept with high-strength bearings ensure the product itself is durable and efficient
A variety of output ideas such as shaft output, flange and gear are available.
1 arc minute ≤ backlash ≤ 3 arc minutes
Reduction ratios ranging from 3 to 100
Frame design: increases torque and optimizes power transmission
Optimised selection of oil seals: reduces friction and laminate transmission efficiency
Protection class IP65
Warranty: 2 years
Our Advantages
High torque
High load
ultra-precision
Small size
Detailed Photos
Product Parameters
| Segment number | Single segment | ||||||||||||||||
| Ratio | i | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 | ||||||||
| Rated output torque | Nm | 550 | 990 | 1140 | 1040 | 1040 | 950 | 850 | 850 | ||||||||
| Emergency stop torque | Nm | Three times of Maximum Output Torque | |||||||||||||||
| Rated input speed | Rpm | 3000 | |||||||||||||||
| Max input speed | Rpm | 6000 | |||||||||||||||
| Ultraprecise backlash | arcmin | ≤1 | |||||||||||||||
| Precision backlash | arcmin | ≤3 | |||||||||||||||
| Standard backlash | arcmin | ≤5 | |||||||||||||||
| Torsional rigidity | Nm/arcmin | 145 | |||||||||||||||
| Max.bending moment | Nm | 18000 | |||||||||||||||
| Max.axial force | N | 19500 | |||||||||||||||
| Service life | hr | 30000(15000 under continuous operation) | |||||||||||||||
| Efficiency | % | ≥97% | |||||||||||||||
| Weight | kg | 28 | |||||||||||||||
| Operating Temperature | ºC | -10ºC~+90ºC | |||||||||||||||
| Lubrication | Synthetic grease | ||||||||||||||||
| Protection class | IP64 | ||||||||||||||||
| Mounting Position | All directions | ||||||||||||||||
| Noise level(N1=3000rpm,non-loaded) | dB(A) | ≤67 | |||||||||||||||
| Rotary inertia | Kg·cm² | 28.98 | 23.67 | 23.29 | 22.75 | 22.48 | 22.59 | 22.53 | 22.51 | ||||||||
Applicable Industries
Packaging Machinery Mechanical Hand Textile Machinery
Non Standard automation Machine Tool Printing Equipment
Certifications
Company Profile
DESBOER (HangZhou) Transmission Technology Co., Ltd. is a subsidiary of DESBOER (China), which is committed to the design, development, customized production and sales of high precision planetary reducer as 1 of the technology company. Our company has over 10 years of design, production and sales experience, the main products are the high precision planetary reducer, gear, rack, etc., with high quality, short delivery period, high cost performance and other advantages to better serve the demand of global customers. It is worth noting that we remove the intermediate link sale from the factory directly to customers, so that you can get the most ideal price and also get our best quality service simultaneously.
About Research
In order to strengthen the advantages of products in the international market, the head company in Kyoto, Japan to established KABUSHIKIKAISYA KYOEKI, mainly engaged in the development of DESBOER high precision planetary reducer, high precision of transmission components such as the development work, to provide the most advanced design technology and the most high-quality products for the international market.
/* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1
| Application: | Motor, Machinery, Marine, Agricultural Machinery, CNC Machine |
|---|---|
| Function: | Change Drive Torque, Speed Changing, Speed Reduction |
| Layout: | Plantery Type |
| Hardness: | Hardened Tooth Surface |
| Installation: | All Directions |
| Step: | Single-Step |
| Customization: |
Available
| Customized Request |
|---|
Emerging Trends in Speed Reducer Gearbox Technology
Speed reducer gearbox technology is undergoing continuous advancements, driven by the need for improved efficiency, reliability, and performance in various industrial applications. Some emerging trends in speed reducer gearbox technology include:
- Compact and Lightweight Designs: Manufacturers are developing speed reducer gearboxes with compact and lightweight designs, allowing for easier integration into space-constrained environments and reducing overall equipment weight.
- High-Efficiency Gearing: Advanced materials and manufacturing processes are being used to create high-efficiency gear designs, minimizing friction and energy losses, and maximizing power transmission.
- Integrated Sensors and Monitoring: Many modern speed reducer gearboxes come equipped with integrated sensors and monitoring systems. These technologies enable real-time data collection, condition monitoring, and predictive maintenance, enhancing reliability and reducing downtime.
- Smart and Digital Gearboxes: The integration of digital technologies, such as IoT (Internet of Things) connectivity and automation, is transforming traditional speed reducer gearboxes into “smart” gearboxes. These gearboxes can communicate with other equipment, adjust settings remotely, and optimize performance based on real-time data.
- Noise and Vibration Reduction: Noise and vibration reduction technologies are becoming more prominent in speed reducer gearbox design. Enhanced damping and isolation features help minimize noise levels and vibrations, contributing to quieter and more comfortable operating environments.
- Customization and Modular Design: Manufacturers are offering more customization options and modular designs for speed reducer gearboxes. This allows users to tailor gearboxes to their specific needs and easily replace individual components for maintenance purposes.
As technology continues to evolve, these emerging trends in speed reducer gearbox technology are likely to drive further innovation, enabling industries to achieve higher levels of efficiency, productivity, and overall equipment performance.
Limitations and Drawbacks of Speed Reducer Gearbox Systems
While speed reducer gearbox systems offer various benefits, they also come with certain limitations and drawbacks that should be considered:
1. Efficiency Loss: Speed reducer gearboxes introduce mechanical losses due to friction and gear meshing. These losses can result in reduced overall efficiency, especially in applications where precise speed control is crucial.
2. Size and Weight: Gearboxes add size and weight to the machinery, which can be a limitation in space-constrained environments or applications where weight is a critical factor.
3. Cost: The design, manufacturing, and maintenance of speed reducer gearboxes can be complex and costly. High-quality materials and precision engineering contribute to higher upfront and operational costs.
4. Maintenance: Gearboxes require regular maintenance, including lubrication, inspection, and potential replacement of worn parts. Improper maintenance can lead to reduced lifespan and operational issues.
5. Backlash: Gears within speed reducer gearboxes may exhibit backlash, which is the small amount of play between gear teeth. Backlash can affect precision in applications requiring accurate positioning.
6. Noise and Vibration: Gear meshing can generate noise and vibrations, especially at higher speeds. Additional measures may be needed to mitigate these effects and ensure a quieter operating environment.
7. Limited Ratios: Some gearbox designs offer a limited range of gear ratios, which may restrict the flexibility of certain applications requiring specific speed adjustments.
8. Heat Generation: The mechanical processes within gearboxes can generate heat, and inadequate cooling or lubrication can lead to overheating and reduced efficiency.
Despite these limitations, proper selection, design, and maintenance of speed reducer gearbox systems can help mitigate these drawbacks and ensure their effective integration into various mechanical systems.
How do Speed Reducer Gearboxes Contribute to Reducing Rotational Speed and Increasing Torque?
Speed reducer gearboxes play a critical role in mechanical systems by achieving the dual objectives of reducing rotational speed and increasing torque. This fundamental function is accomplished through the intricate interaction of different types of gears within the gearbox.
At its core, a speed reducer gearbox consists of multiple gears with varying sizes and configurations. The gears are arranged in specific sequences to create gear trains that manipulate the input speed and torque to achieve the desired output characteristics.
The reduction of rotational speed is achieved through gear train arrangements that involve gear pairs with different numbers of teeth, commonly known as gear ratios. When an input shaft connected to a higher-speed power source engages with a gear of smaller size, it drives a larger gear connected to the output shaft. This gear reduction process results in a lower rotational speed at the output shaft compared to the input shaft. The change in gear size and ratio effectively converts the input speed into a reduced output speed.
Simultaneously, the interaction of gears in the speed reducer gearbox leads to an increase in torque. As the input torque is distributed across the gear train, the larger gear driven by the smaller gear experiences a higher force at its teeth. This force is transmitted through the gears, leading to a torque amplification at the output shaft. In other words, the output torque is greater than the input torque due to the mechanical advantage gained from the gear arrangement.
The combination of gear reduction and torque amplification allows speed reducer gearboxes to match the requirements of various applications. Industries such as manufacturing, material handling, automotive, and robotics benefit from this functionality. For instance, in conveyor systems, the gearbox reduces the high-speed motor rotation to a suitable speed for smoothly transporting materials, all while providing the necessary torque to handle loads efficiently.
In summary, speed reducer gearboxes utilize gear ratios and interactions to effectively lower rotational speed while increasing torque. This capability is instrumental in optimizing the performance of mechanical systems across diverse industrial sectors.
editor by CX 2024-05-17
China Hot selling Wheel and Crawler Trucks High Torque Final Travel Drive Planetary Speed Reducer Gearbox comer gearbox
Product Description
Product Description
Wheel and Crawler Trucks High Torque Final Travel Drive Planetary Speed Reducer Gearbox
Panetary reducer gearbox is designed with large torque, high start and transmission efficiency, low-speed stability, compact radial size, low noise, etc.The main devices we are making are walking reducers, lifting reducers and swing reducers.They are widely used for vehicle cranes, crawler cranes, truck mounted cranes, marine cranes, aerial work trucks, excavators, etc.
| Product | Travel drive planetary reducer |
| Model | IDKN60B140S |
| Rated output torque | 60000 Nm |
| Max. output torque | 75000 Nm |
| Ratio | 166:1 |
| Rated input torque | 352 Nm |
| Max. input torque | 440 Nm |
| Max. input speed | 2050 r/min |
| Max. output speed | 12 r/min |
| Application | final drive for various trucks, excavators, crawler cranes, etc |
| OEM | Acceptable |
Product features:
1.Compact size
2.Low noise
3.High start-up and working efficiency
4.Easy installation, operation and maintenance
5.Various models for wide applications
6.One year warranty
7.Free components for replacement within warranty period
8.Professional and tailored solution for different requirements
9.Free technical support at any time
10.Customer training is available.
Detailed Photos
Wheel and Crawler Trucks High Torque Final Travel Drive Planetary Speed Reducer Gearbox
Packaging & Shipping
Wheel and Crawler Trucks High Torque Final Travel Drive Planetary Speed Reducer Gearbox
Packing method: plywood box (1 pc / box)
Packing Dimensions: 520*520*490 mm
Weight: 280 kg
Company Profile
HangZhou Chuangdong New Material Technology Co., Ltd. is located in HangZhou City, ZheJiang Province, China. The factory was established in 2008 and specializes in the research and development of planetary transmission technology products. The company’s main products are the following 4 series Automobile crane series products, the main products are 8-160 tons hoisting mechanism and slewing mechanism, the products can be widely used in the automobile crane and crawler crane, we mainly serving Senyuan Heavy Industry, ZheJiang Juntong, CHINAMFG Heavy Industry and other large enterprises, also exported to Russia and other countries. Aerial work vehicle series products, the main products are composed of 18-30m vehicle-mounted and self-propelled aerial work vehicle hoisting mechanism and slewing mechanism, and the products can be widely used in the aerial work vehicle industry. Now we mainly serves large enterprises such as HangZhou Handler and ZheZheJiang ngbang Heavy Industry. Wrecker series products, the main products are hydraulic winches from 1.5 tons to 60 tons composed of IYJ100A, IYJ150A, IYJ200, IYJ250, IYJ080A, etc. The products can be widely used in the road wrecker industry. Now we mainly serves domestic large-scale special vehicle manufacturers such as ZheJiang Yuehai, ZheJiang Longyi, HangZhou Suiqi, HangZhou Zhongqi, ZheJiang Chengli, Sinotruk, etc., also exports to Canada, South America and other countries. Our company always regards product strategy and quality management as the top priority of the company’s development. Now we have 5 utility model patents and 2 appearance patents. Establish long-term cooperative relations with ZheJiang Mechanical Design Institute, ZheJiang University, HangZhou University of Technology and many other scientific research institutions. We have obtained ISO9001.2015 quality management system certificate in 2016, the Haizhelun high-altitude vehicle that applied the company’s products passed the inspection of the people of the whole country. The company also reached trade cooperation with Canada, Russia, Brazil, Australia and India and other product companies. We welcome your cooperation.
FAQ
1.How to choose the product which meets our requirement?
A) Look through our shop, find a proper item, send me an inquiry, I quote details for you.
B) In case no suitable item in our shop, send me an inquiry with your requirements, we can customize for you.
2.What is payment term?
A) For regular design: 30% deposit, the balance before loading.
B) For customized design: 50% deposit, the balance before loading.
Payment term is negotiable according to order.
3.What is delivery time?
A) For common models in stock, delivery time are 5-7 days.
B) For customized models and new production, delivery time are 30-40 days.
5.How about after-sale service?
A) Within warranty, all spare parts are delivered for free.
B) Exceed warranty, all spare parts are offered with the lowest production cost.
Warranty period is 1 year, but our servicing is for the whole lifetime of product, so no worry for reselling and personal resell.
Thank you for the time. For any question or requirements, please contact me 🙂
/* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1
| Application: | Machinery, Trucks |
|---|---|
| Hardness: | Hardened Tooth Surface |
| Installation: | Horizontal Type |
| Layout: | Coaxial |
| Gear Shape: | Cylindrical Gear |
| Step: | Three-Step |
| Samples: |
US$ 2000/Piece
1 Piece(Min.Order) | |
|---|
| Customization: |
Available
| Customized Request |
|---|
Ensuring Precision of Gear Tooth Profiles in Speed Reducer Gearboxes
Manufacturers employ several techniques to ensure the precision of gear tooth profiles in speed reducer gearboxes, which is crucial for optimal performance and longevity:
- High-Quality Materials: Manufacturers use high-quality materials for gear manufacturing, such as hardened steel or specialized alloys, to enhance durability and minimize wear.
- Precision Machining: Advanced machining processes, including CNC (Computer Numerical Control) machining and grinding, ensure accurate tooth profiles and precise gear dimensions.
- Tooth Profile Design: Detailed tooth profile designs based on mathematical calculations and engineering principles help optimize meshing and minimize stress concentration.
- Tooth Forming Techniques: Various tooth forming methods, such as hobbing, shaping, and broaching, are employed to create accurate gear tooth profiles with minimal deviations.
- Heat Treatment: Heat treatment processes like carburizing, quenching, and tempering are used to achieve the desired hardness and strength, ensuring gear teeth can withstand operational stresses.
- Quality Control: Rigorous quality control measures, including inspection using precision tools like coordinate measuring machines (CMMs), ensure compliance with design specifications.
- Lubrication and Surface Coatings: Proper lubrication and specialized surface coatings help reduce friction and wear, maintaining accurate tooth profiles during operation.
By implementing these techniques and adhering to stringent quality standards, manufacturers can achieve the required precision in gear tooth profiles, resulting in smooth and efficient operation of speed reducer gearboxes.
Efficient Power Transmission and Motion Control in Speed Reducer Gearboxes
Speed reducer gearboxes play a crucial role in ensuring efficient power transmission and precise motion control in various mechanical systems. Here’s how they achieve these objectives:
Power Transmission: Speed reducer gearboxes utilize a combination of gears, shafts, and bearings to transmit power from the input shaft to the output shaft. The gear train within the gearbox transforms the input speed and torque to the desired output speed and torque, allowing for effective power transmission.
Mechanical Advantage: The gear ratio in a speed reducer gearbox provides a mechanical advantage by reducing the rotational speed while increasing the available torque. This enables the gearbox to handle higher loads and deliver the required force for specific applications.
Reduced Energy Loss: By optimizing the gear meshing and minimizing friction between components, speed reducer gearboxes help reduce energy loss during power transmission. This leads to higher efficiency and lower heat generation, resulting in improved energy conservation.
Motion Control: Speed reducer gearboxes enable precise motion control by accurately converting input motion to the desired output motion. The gear ratio determines the relationship between input and output speeds, allowing for controlled movement, rotation, or positioning of machinery or equipment.
Backlash Minimization: High-quality speed reducer gearboxes are designed to minimize backlash, which is the play or clearance between gear teeth. This feature ensures accurate and repeatable motion, making them suitable for applications that require precise positioning and synchronization.
Noise and Vibration Reduction: Many speed reducer gearboxes incorporate features such as helical or planetary gears, which help reduce noise and vibration levels during operation. This is particularly important for applications where noise and vibration control is essential.
Enhanced System Stability: Speed reducer gearboxes provide stability to mechanical systems by controlling the speed and torque output. This stability contributes to smoother operation, reduced wear and tear on components, and increased overall system reliability.
Overall, speed reducer gearboxes ensure efficient power transmission and motion control by utilizing their mechanical design, gear arrangements, and precision manufacturing. Their ability to transform and manage power enables them to meet the specific requirements of diverse industrial applications while optimizing performance and reliability.
How do Speed Reducer Gearboxes Contribute to Reducing Rotational Speed and Increasing Torque?
Speed reducer gearboxes play a critical role in mechanical systems by achieving the dual objectives of reducing rotational speed and increasing torque. This fundamental function is accomplished through the intricate interaction of different types of gears within the gearbox.
At its core, a speed reducer gearbox consists of multiple gears with varying sizes and configurations. The gears are arranged in specific sequences to create gear trains that manipulate the input speed and torque to achieve the desired output characteristics.
The reduction of rotational speed is achieved through gear train arrangements that involve gear pairs with different numbers of teeth, commonly known as gear ratios. When an input shaft connected to a higher-speed power source engages with a gear of smaller size, it drives a larger gear connected to the output shaft. This gear reduction process results in a lower rotational speed at the output shaft compared to the input shaft. The change in gear size and ratio effectively converts the input speed into a reduced output speed.
Simultaneously, the interaction of gears in the speed reducer gearbox leads to an increase in torque. As the input torque is distributed across the gear train, the larger gear driven by the smaller gear experiences a higher force at its teeth. This force is transmitted through the gears, leading to a torque amplification at the output shaft. In other words, the output torque is greater than the input torque due to the mechanical advantage gained from the gear arrangement.
The combination of gear reduction and torque amplification allows speed reducer gearboxes to match the requirements of various applications. Industries such as manufacturing, material handling, automotive, and robotics benefit from this functionality. For instance, in conveyor systems, the gearbox reduces the high-speed motor rotation to a suitable speed for smoothly transporting materials, all while providing the necessary torque to handle loads efficiently.
In summary, speed reducer gearboxes utilize gear ratios and interactions to effectively lower rotational speed while increasing torque. This capability is instrumental in optimizing the performance of mechanical systems across diverse industrial sectors.
editor by CX 2024-05-16
China Custom Desboer NF180 High Torque Planetary Gearbox Speed Reducer Gear Box for Motor Transmission Reduction Gearbox cvt gearbox
Product Description
Product Description
The NF180 series planetary gearboxes are designed and machined as a single unit with special tapered roller bearings to provide high radial load, high torque, ultra-precision, and small size. The ND series uses in highly rigid industries such as fiber optic laser equipment, floor track equipment, robot seventh axis, Parallel robots (spider hand) machine tools, and rotating arms.
Product Name: High Precision Planetary Reducer
Product Series: NF180 Series
Product features: high torque, high load, ultra-precision, small size
Product Description:
Integrated design concept with high-strength bearings ensure the product itself is durable and efficient
A variety of output ideas such as shaft output, flange and gear are available.
1 arc minute ≤ backlash ≤ 3 arc minutes
Reduction ratios ranging from 3 to 100
Frame design: increases torque and optimizes power transmission
Optimised selection of oil seals: reduces friction and laminate transmission efficiency
Protection class IP65
Warranty: 2 years
Our Advantages
High torque
High load
ultra-precision
Small size
Detailed Photos
Product Parameters
| Segment number | Single segment | ||||||||||||||||
| Ratio | i | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 | ||||||||
| Rated output torque | Nm | 550 | 990 | 1140 | 1040 | 1040 | 950 | 850 | 850 | ||||||||
| Emergency stop torque | Nm | Three times of Maximum Output Torque | |||||||||||||||
| Rated input speed | Rpm | 3000 | |||||||||||||||
| Max input speed | Rpm | 6000 | |||||||||||||||
| Ultraprecise backlash | arcmin | ≤1 | |||||||||||||||
| Precision backlash | arcmin | ≤3 | |||||||||||||||
| Standard backlash | arcmin | ≤5 | |||||||||||||||
| Torsional rigidity | Nm/arcmin | 145 | |||||||||||||||
| Max.bending moment | Nm | 18000 | |||||||||||||||
| Max.axial force | N | 19500 | |||||||||||||||
| Service life | hr | 30000(15000 under continuous operation) | |||||||||||||||
| Efficiency | % | ≥97% | |||||||||||||||
| Weight | kg | 28 | |||||||||||||||
| Operating Temperature | ºC | -10ºC~+90ºC | |||||||||||||||
| Lubrication | Synthetic grease | ||||||||||||||||
| Protection class | IP64 | ||||||||||||||||
| Mounting Position | All directions | ||||||||||||||||
| Noise level(N1=3000rpm,non-loaded) | dB(A) | ≤67 | |||||||||||||||
| Rotary inertia | Kg·cm² | 28.98 | 23.67 | 23.29 | 22.75 | 22.48 | 22.59 | 22.53 | 22.51 | ||||||||
Applicable Industries
Packaging Machinery Mechanical Hand Textile Machinery
Non Standard automation Machine Tool Printing Equipment
Certifications
Company Profile
DESBOER (HangZhou) Transmission Technology Co., Ltd. is a subsidiary of DESBOER (China), which is committed to the design, development, customized production and sales of high precision planetary reducer as 1 of the technology company. Our company has over 10 years of design, production and sales experience, the main products are the high precision planetary reducer, gear, rack, etc., with high quality, short delivery period, high cost performance and other advantages to better serve the demand of global customers. It is worth noting that we remove the intermediate link sale from the factory directly to customers, so that you can get the most ideal price and also get our best quality service simultaneously.
About Research
In order to strengthen the advantages of products in the international market, the head company in Kyoto, Japan to established KABUSHIKIKAISYA KYOEKI, mainly engaged in the development of DESBOER high precision planetary reducer, high precision of transmission components such as the development work, to provide the most advanced design technology and the most high-quality products for the international market.
/* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1
| Application: | Motor, Machinery, Marine, Agricultural Machinery, CNC Machine |
|---|---|
| Function: | Change Drive Torque, Speed Changing, Speed Reduction |
| Layout: | Plantery Type |
| Hardness: | Hardened Tooth Surface |
| Installation: | All Directions |
| Step: | Single-Step |
| Customization: |
Available
| Customized Request |
|---|
Contribution of Speed Reducer Gearboxes to Energy Efficiency in Machinery
Speed reducer gearboxes play a significant role in enhancing energy efficiency across various industrial applications. Their contributions are as follows:
- Optimized Power Transmission: Speed reducer gearboxes efficiently transfer power from input to output shafts, ensuring minimal energy loss during transmission. By reducing unnecessary friction and minimizing internal losses, these gearboxes maximize power delivery to the intended machinery.
- Torque Amplification: Speed reducers increase torque while reducing rotational speed. This allows larger loads to be moved with less power input, resulting in improved efficiency and reduced energy consumption.
- Variable Speed Control: Some speed reducer gearboxes offer adjustable speed settings, enabling machinery to operate at the most energy-efficient speed for a given task. This feature is especially beneficial in applications with varying load requirements.
- Optimized Motion Profiles: Speed reducer gearboxes help achieve smoother and controlled motion in machinery. By minimizing jerky movements and vibrations, energy waste due to sudden accelerations and decelerations is reduced.
- Reduced Heat Generation: Efficient speed reduction leads to lower heat generation within gearboxes, resulting in decreased energy loss due to heat dissipation. This is particularly important in applications that involve continuous operation.
- Mechanical Advantage: Speed reducers provide mechanical advantage, allowing equipment to perform tasks more easily and efficiently. This can lead to decreased wear and tear on machinery components and, consequently, reduced energy consumption.
Overall, speed reducer gearboxes contribute to energy efficiency by optimizing power transmission, reducing losses, enhancing torque delivery, and enabling precise control over machinery speed and motion. Their inclusion in various industrial setups helps lower energy consumption, operational costs, and environmental impact.
Impact of Gear Ratios on Performance of Speed Reducer Gearboxes
Gear ratios in speed reducer gearboxes play a crucial role in determining their performance characteristics and capabilities. The gear ratio represents the ratio of the number of teeth on the driving (input) gear to the number of teeth on the driven (output) gear within the gearbox. This ratio directly affects how the gearbox transforms the input speed and torque into the desired output speed and torque.
Speed Reduction: A higher gear ratio in a speed reducer gearbox results in greater speed reduction. In this case, the input shaft’s higher rotational speed is converted into a lower rotational speed at the output shaft. This is advantageous for applications that require increased torque and reduced speed, such as heavy-duty machinery and conveyor systems.
Speed Increase: Conversely, a lower gear ratio in a speed reducer gearbox leads to speed increase. The input shaft’s rotational speed is transformed into a higher rotational speed at the output shaft, albeit with decreased torque. This configuration is useful in applications where higher speed is necessary, such as certain types of pumps and fans.
The choice of gear ratio is a critical design consideration when selecting a speed reducer gearbox for a specific application. It determines the trade-off between speed and torque, allowing engineers to tailor the gearbox’s performance to match the requirements of the machinery and equipment it will drive.
Industries and Machinery Using Speed Reducer Gearboxes
Speed reducer gearboxes find extensive use in various industries and machinery where precise speed reduction and torque amplification are essential for optimal performance. Some of the industries and machinery commonly utilizing speed reducer gearboxes include:
1. Manufacturing: Speed reducer gearboxes are crucial in manufacturing processes such as conveyor systems, material handling equipment, packaging machinery, and assembly lines, where controlled motion and torque are required.
2. Robotics and Automation: Robotic arms, automated guided vehicles (AGVs), and industrial robots rely on speed reducer gearboxes to achieve accurate and controlled movement, enabling efficient automation in industries like automotive, electronics, and logistics.
3. Agriculture: Farming equipment, such as tractors and combine harvesters, utilize speed reducer gearboxes to provide the necessary torque and power for tasks like plowing, planting, and harvesting.
4. Construction: Construction machinery such as cranes, excavators, and concrete mixers use speed reducer gearboxes to manage heavy loads and ensure controlled operation during various construction activities.
5. Mining: Mining equipment, including conveyor systems, crushers, and rock drills, require speed reducer gearboxes to handle the demanding conditions and heavy loads encountered in mining operations.
6. Material Handling: Forklifts, elevators, and warehouse equipment utilize speed reducer gearboxes to control lifting and movement of goods, ensuring safe and efficient material handling.
7. Energy and Power Generation: Wind turbines, hydroelectric generators, and solar tracking systems employ speed reducer gearboxes to convert variable input speeds into consistent rotational motion for power generation.
8. Automotive: Speed reducer gearboxes are used in automotive applications, such as differential gears, to manage torque distribution between wheels and axles, contributing to vehicle stability and traction.
9. Aerospace: Aircraft systems and components, including flight control surfaces and landing gear, utilize speed reducer gearboxes for precise and controlled movement during flight and ground operations.
10. Marine: Marine propulsion systems, ship steering mechanisms, and winches rely on speed reducer gearboxes to provide the necessary power and control for marine vessels.
11. Food and Beverage: Processing equipment in the food and beverage industry, such as mixers, extruders, and conveyor systems, use speed reducer gearboxes to maintain consistent and controlled processing conditions.
These are just a few examples of the diverse industries and machinery that benefit from the use of speed reducer gearboxes. The adaptability, precision, and efficiency of speed reducer gearboxes make them essential components in various applications across different sectors.
editor by CX 2024-05-16
China Good quality CZPT Arrow Znfpx High Torque Royal Enfield Gearbox Speed for Complete Extruder Machine with Great quality
Product Description
Overview
Product Description
Wide Selection of Gearbox Products
The gearbox usually adopts a general design scheme, but in special cases, the design scheme of the gearbox can be changed according to the demands of the user, and it can be modified into an industry-specific gearbox. In the design scheme of the gearbox, the parallel shaft, vertical shaft, general box, and various parts can be changed
Advantages
- Absorption of very high torques and axial forces
- No need for separate thrust housing & bearing.
- Easy alignment (screw directly fits into the vore of gear box)
- Easy to assemble & dismantle.
- Very heavy duty spherical roller thrust bearing is provided.
- Power saving. (you may save up to 20 % power.)
- Less requirement of space.
- For bigger sizes water cooling is provided
- No maintenance required except periodic oil level checking.
- Higher productivity
Features
- Twin Screw Extruder Gearboxes offer the dual shaft counter rotating. The range is available for various center distances
- The gearboxes are available with co-rotating and counter rotating variants
- To work under heavy loading force, the high level dissipation and oil lubrication system are provided. The axial roller type swivel thrust with the thrust bearing coupled in tandem way support the axial thrust
- High torque and high speed output rate
Processing Characteristics of Screw Shaft:
1.Suitable suggestion on material to ensure components performance and extend lifetime of products.
2.Professional technical team can provide surveying and mapping support.
3.All components are finished by CNC machine.
4.Sophisticated quality management system ensure superior quality.
Basic Info.
| Warranty: 1 year | Weight (KG): 500 KG |
| Place of Origin: HangZhou, China |
Gearing Arrangement: helical |
| ratio: 8-20 |
Output Torque: 2*176 |
| standard: JB/T8853-2001 |
Certificate: CE |
| Heat treatment: High-frequency Hardening |
Efficiency: 94%~98%(depends on the transmission stage) |
| Customized support:OEM ODM | Input/output shaft material 40Cr |
| Package: Wooden case |
Mount position: Flange, hollow shaft, CHINAMFG shaft |
| After-sale:Online 24/7 Installation Xihu (West Lake) Dis. | advantage: excellent quality |
| Reduction radio: 3:1 |
Mount Position: Horizontal Foot Mounted Vertical |
| Input Speed: 1500 |
Output Speed: 500 |
Packaging & delivery
|
Packing: wooden case packing |
|
| Port: HangZhou Port |
Applications
X helical gear units for double-screw extruders with parallel drive shafts and the same direction of screw rotation are used mainly in the manufacture of granulates and the refining of raw plastics. Other areas of application include:
- Paint and lacquer industry
- Washing agent industry
- Foodstuff industry (e.g. bread, pasta)
- Animal-feed industry (dog, cat other animal food
Maintenance of the gearbox of the dual-screw extruder
1. The gear box of the dual-screw extruder should be well-ventilated, and the working environment temperature should be within the range of 5-35 °C.
2. Always check the oil quantity of the gear lubricating oil in the box to ensure that the transmission parts in the box are well lubricated.
3. Pay attention to check the bearing parts of the box frequently. The oil temperature of the oil tank of the transmission box should not exceed 70 ºC during operation.
4. The newly put into use gearbox needs to replace the lubricating oil after 250 hours of operation. The oil change time depends on the state of the oil. It is recommended to replace it after 4000-8000 hours of operation or once a year.
5. The gearbox of the dual-screw extruder needs to be regularly maintained and inspected once a year
Operating Process
1. The gear on the input shaft is driven by the motor and starts to rotate.
2. The rotating input gear meshes with other gears inside the gearbox, transmitting power.
3. Different-sized gears within the gearbox are combined to form a gear train. Through continuous meshing and rotation, the high-speed, low-torque power from the input shaft gradually converts into low-speed, high-torque output.
4. The output shaft is connected to the last gear and transfers the output torque to the load.
5. Gear reduction gearboxes typically include lubrication and cooling systems to ensure smooth operation and prevent overheating and damage.
6. Our extruder gearbox converts high-speed, low-torque power into low-speed, high-torque output by changing the size ratios and meshing arrangements of different gears, achieving the function of speed reduction.
Types of Gearboxes:
Based on customer requirements, gear reduction gearboxes can be classified according to the size of the output shaft, center distance of the output shaft, output speed, and torque. Alternatively, we can provide several commonly used types of gearboxes for customers to choose from.
Product Service
|
24-hour Hotline
No matter when and where to call we can find our service to you.
|
Pre-sales Consultation
We have 5 sales people online, and whether you have any question can be solved through online communication. |
After-sales Services
Receive products have any questions about the product, can look for us,we will help you deal with the the first time,to your satisfaction. |
Exhibition
Certificate
Company profile
ZheJiang Arrow Machinery Co., Ltd.is a company specializing in R&D, production, sales, application promotion of food engineering projects. As 1 of the largest scaled food processing equipment &whole plant engineering problem solvers in China, machines served for more than 970 companies, export to 116 countries, area, more than 20 years engineering team, we recognize that quality equals value, aims to create a great future together with global customers.
FAQ
1. Q: How about Arrow Machinery?
R: ZheJiang Arrow Machinery Co., Ltd. is a High-Tech company. Our firm is composed of a strong
team which has substantial experience in R&D, manufacture, technique and sales service and has
specialized in extruder industry for 10 years,leading screw barrel manufacturer in China.
2. Q:What’s Arrow machinery’s capacity?
R:Company is in strict accordance with CE and ISO9001 quality certification system.There are over 200
models of extruders and spare parts.
3. Q:What’s the delivery time?
R:For regular size, we have finished stock and semi-finished stock, 2 weeks max enough
for customized, normally within 20days .
4. Q:How about the gearbox quality and price?
R: top quality in China with competitive price and globle after-sale service
5. Q:what’s the life time and guarantee buy from Arrow machinery ?
R: 3~5years life time for nitriding ones and bimtallic ones will be longer
One year min. Guarantee.
6.Q:Where is Arrow Machinery factory and how to reach there?
R:NO.47 Chengbohu Road, Xihu (West Lake) Dis. District,HangZhou City, China. You can take the train or plane to HangZhou and we can pick you up.
7.Q:How to contact with you?
R:just reply to me if have any question.
/* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1
| Application: | Motor, Machinery |
|---|---|
| Function: | Distribution Power, Change Drive Torque, Change Drive Direction, Speed Changing, Speed Reduction, Speed Increase |
| Layout: | Cycloidal |
| Customization: |
Available
| Customized Request |
|---|
.shipping-cost-tm .tm-status-off{background: none;padding:0;color: #1470cc}
|
Shipping Cost:
Estimated freight per unit. |
about shipping cost and estimated delivery time. |
|---|
| Payment Method: |
|
|---|---|
|
Initial Payment Full Payment |
| Currency: | US$ |
|---|
| Return&refunds: | You can apply for a refund up to 30 days after receipt of the products. |
|---|
editor by CX 2024-05-16
China Best Sales Djyg Series High Torque Speed Reducer Gearbox for Plastic Rubber Single Screw Extruder planetary gearbox
Product Description
DJYG Series High Torque Speed Reducer Gearbox for Plastic Rubber Single Screw Extruder
Product Description
Feature:
DJYG Series High Torque Speed Reducer Gearbox is a transmission component with hard tooth surface and with thrust package for
plastic,rubber single-screw extruder.
Its characteristic is that the gears and shaft parts are made of high-strength alloy steel.
The gears are processed by carburizing, quenching, and gear grinding.
Gear accuracy is level 5- 6. Tooth surface hardness is HRC56~62. A large-size thrust bearing is arranged at the front end of the hollow input shaft to withstand the axial thrust of the screw when it is working.
The whole machine has the characteristics of small size, high carrying capacity, stable transmission and low noise
OVERVIEW
| Product Name | DJYG Series High Torque Speed Reducer Gearbox for Plastic Rubber Single Screw Extruder |
| Gear material | 20CrMnMO ,20CrNi2MoA,17CrNiMo6alloy steel |
| Color | Customerized |
| Case Material | Cast iron HT250 /QT400 |
| Brand of bearings | C&U bearing, ZWZ,LYC, HRB, CHINAMFG ,etc |
| Brand of oil seal | NAK or other brand |
| Surface hardness of gears | HRC56°~62 ° |
| Machining precision of gears | 5 -6 Grade |
| Heat treatment | Carburizing, Quenching etc |
SIZE
133,146,160,180,200,225,250,280,320,360
Detailed Photos
Certifications
Packaging & Shipping
Installation Instructions
Company Profile
< ABOUT TILI
< WORKSHOP
< QUALITY CONTROL
FAQ
Q 1: Are you a trading company or a manufacturer?
A: We are a professional manufacturer specializing in manufacturing various series of reducer.
Q 2:Can you do OEM?
A:Yes, we can. We can do OEM for all the customers .if you want to order NON-STANDERD speed reducers,pls provide Drafts, Dimensions, Pictures and Samples if possible.
Q 3: How long is your warranty?
A: Our Warranty is 12 months under normal circumstances.
Q 4: Do you have inspection procedures for reducer?
A:100% self-inspection before packing.
Q 5: Can I have a visit to your factory before the order?
A: Sure, welcome to visit our factory.
Q 6:How to choose a gearbox? What if I don’t know which gear reducer I need?
A:You can refer to our catalogue to choose the gearbox or we can help to choose when you provide,the technical information of required output torque, output speed and motor parameter etc. Don’t worry, Send as much information as you can, our team will help you find the right 1 you are looking for.
Q 7: What information shall we give before placing a purchase order?
A:a) Type of the gearbox, Size , Transmission Ratio, input and output type, input flange, mounting position, motor information and shaft deflection etc. b)Housing color.c) Purchase quantity. d) Other special requirements
Q 8:What is the payment term?
A:You can pay via T/T(30% in advance as deposit before production +70% before delivery
/* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1
| Application: | Motor, Machinery, Marine, Agricultural Machinery |
|---|---|
| Function: | Distribution Power, Change Drive Torque, Change Drive Direction, Speed Changing, Speed Reduction |
| Layout: | Cycloidal |
| Hardness: | Hardened Tooth Surface |
| Installation: | Vertical Type |
| Step: | Three-Step |
| Customization: |
Available
| Customized Request |
|---|
Ensuring Precision of Gear Tooth Profiles in Speed Reducer Gearboxes
Manufacturers employ several techniques to ensure the precision of gear tooth profiles in speed reducer gearboxes, which is crucial for optimal performance and longevity:
- High-Quality Materials: Manufacturers use high-quality materials for gear manufacturing, such as hardened steel or specialized alloys, to enhance durability and minimize wear.
- Precision Machining: Advanced machining processes, including CNC (Computer Numerical Control) machining and grinding, ensure accurate tooth profiles and precise gear dimensions.
- Tooth Profile Design: Detailed tooth profile designs based on mathematical calculations and engineering principles help optimize meshing and minimize stress concentration.
- Tooth Forming Techniques: Various tooth forming methods, such as hobbing, shaping, and broaching, are employed to create accurate gear tooth profiles with minimal deviations.
- Heat Treatment: Heat treatment processes like carburizing, quenching, and tempering are used to achieve the desired hardness and strength, ensuring gear teeth can withstand operational stresses.
- Quality Control: Rigorous quality control measures, including inspection using precision tools like coordinate measuring machines (CMMs), ensure compliance with design specifications.
- Lubrication and Surface Coatings: Proper lubrication and specialized surface coatings help reduce friction and wear, maintaining accurate tooth profiles during operation.
By implementing these techniques and adhering to stringent quality standards, manufacturers can achieve the required precision in gear tooth profiles, resulting in smooth and efficient operation of speed reducer gearboxes.
Managing Shock Loads and Sudden Speed Changes in Speed Reducer Gearboxes
Speed reducer gearboxes are designed to effectively manage shock loads and sudden changes in rotational speed, ensuring reliable operation and minimizing potential damage to both the gearbox and the connected machinery. They employ various design features and components to achieve this:
1. High-Strength Materials: Speed reducer gearboxes are constructed using durable and high-strength materials, such as alloy steel, to withstand sudden impacts and shock loads without deformation or failure.
2. Robust Bearings: Heavy-duty bearings are used to support the shafts and gears within the gearbox. These bearings are selected for their ability to handle both radial and axial loads, providing stability and reducing the risk of damage.
3. Shock-Resistant Gears: Gear teeth are designed to absorb and distribute shock loads. Tooth profiles and surface treatments are optimized to minimize stress concentrations and prevent premature wear or fractures.
4. Torque Limiters: Some speed reducer gearboxes incorporate torque limiters or overload protection devices. These mechanisms disengage the gearbox from the motor or driven equipment when excessive torque or shock loads are detected, preventing damage to the components.
5. Lubrication: Proper lubrication is essential to reduce friction and dissipate heat generated during sudden speed changes. High-quality lubricants ensure smooth operation and enhance the gearbox’s ability to absorb shocks.
6. Inertia Considerations: Speed reducer gearboxes are designed to manage changes in inertia between the input and output sides. This is important for maintaining stability during sudden acceleration or deceleration.
By incorporating these features and engineering principles, speed reducer gearboxes can effectively handle shock loads and sudden changes in rotational speed, enhancing the overall reliability and performance of mechanical systems.
Types of Speed Reducer Gearboxes and Their Applications
Speed reducer gearboxes come in various types, each designed to suit specific applications and performance requirements. These gearbox designs leverage different gear arrangements and mechanisms to achieve the desired speed reduction and torque amplification. Here are some common types of speed reducer gearboxes and their applications:
1. Planetary Gearbox: Planetary gearboxes, also known as epicyclic gearboxes, consist of a central sun gear, multiple planet gears, and a ring gear. This compact design allows for high torque output and efficiency. Planetary gearboxes are commonly used in applications requiring high torque and precision, such as robotics, automated machinery, and aerospace systems.
2. Helical Gearbox: Helical gearboxes utilize helical gears with inclined teeth to transmit power. They provide smooth and quiet operation and are suitable for applications that require moderate speed reduction and torque amplification, such as conveyors, pumps, and industrial mixers.
3. Worm Gearbox: Worm gearboxes consist of a worm screw and a worm wheel. They offer high torque output and are known for their self-locking capability, making them ideal for applications where backdriving prevention is essential, such as lifting mechanisms, gates, and heavy machinery.
4. Bevel Gearbox: Bevel gearboxes use bevel gears to transmit power between intersecting shafts. They are suitable for changing the direction of rotation and transmitting power at right angles. Bevel gearboxes are commonly used in printing presses, woodworking equipment, and automotive applications.
5. Cycloidal Drive Gearbox: Cycloidal drive gearboxes use a unique mechanism with cycloidal motion to achieve speed reduction and torque amplification. They are known for their high shock-load resistance and compact design. Cycloidal drive gearboxes find applications in robotics, packaging machinery, and material handling systems.
6. Spur Gearbox: Spur gearboxes utilize straight-cut spur gears for power transmission. They are simple in design and are suitable for low-speed applications that require minimal torque amplification, such as printing machines, textile equipment, and food processing machinery.
7. Hypoid Gearbox: Hypoid gearboxes use hypoid gears that resemble spiral bevel gears. They offer higher torque capacity and smoother operation compared to traditional bevel gearboxes. Hypoid gearboxes are commonly used in automotive drivetrains and heavy-duty machinery.
8. Harmonic Drive Gearbox: Harmonic drive gearboxes use a flexible spline and wave generator to achieve speed reduction and torque amplification. They are known for their high precision and backlash-free operation, making them suitable for applications requiring precise motion control, such as semiconductor manufacturing and medical devices.
Each type of speed reducer gearbox offers unique advantages and characteristics, making them suitable for specific applications across industries. The choice of gearbox type depends on factors such as required torque, speed reduction ratio, space limitations, efficiency, and operational demands.
editor by CX 2024-05-15
China supplier CZPT High Torque Speed Planetary Gear Reducer Motor Gearbox for Texitle Machine with Best Sales
Product Description
PRN120 CHINAMFG High Torque Speed Planetary Gear Reducer Motor Gearbox For Texitle Machine
Planetary gearbox is a kind of reducer with wide versatility. The inner gear adopts low carbon alloy steel carburizing quenching and grinding or nitriding process. Planetary gearbox has the characteristics of small structure size, large output torque, high speed ratio, high efficiency, safe and reliable performance, etc. The inner gear of the planetary gearbox can be divided into spur gear and helical gear. Customers can choose the right precision reducer according to the needs of the application.
Product Parameters
Characteristics:
1.Output threaded connection, standard installation,universal usage;
2.Single cantilever structure.simple design,economic price;
3.Working steady. Low noise;
4.Round flange output,threaded reverse connection,standardized size;
5.Keyway can be opened in the force shaft;
6.The output connection specifications are complete and there are many choices;
7.Low backlash. Can suit most occasion;
8.Speed ratio range:3-100;
9.Precision range:8-16arcmin;
10.Size range:60-160mm.
| Specifications | PRN60 | PRN80 | PRN90 | PRN120 | PRN160 | |||
| Technal Parameters | ||||||||
| Max. Torque | Nm | 1.5times rated torque | ||||||
| Emergency Stop Torque | Nm | 2.5times rated torque | ||||||
| Max. Radial Load | N | 240 | 400 | 450 | 1240 | 2250 | ||
| Max. Axial Load | N | 220 | 420 | 430 | 1000 | 1500 | ||
| Torsional Rigidity | Nm/arcmin | 1.8 | 4.7 | 4.85 | 11 | 35 | ||
| Max.Input Speed | rpm | 8000 | 6000 | 6000 | 6000 | 4000 | ||
| Rated Input Speed | rpm | 4000 | 3500 | 3500 | 3500 | 3000 | ||
| Noise | dB | ≤58 | ≤60 | ≤60 | ≤65 | ≤70 | ||
| Average Life Time | h | 20000 | ||||||
| Efficiency Of Full Load | % | L1≥96% L2≥94% | ||||||
| Return Backlash | P1 | L1 | arcmin | ≤8 | ≤8 | ≤8 | ≤8 | ≤8 |
| L2 | arcmin | ≤12 | ≤12 | ≤12 | ≤12 | ≤12 | ||
| P2 | L1 | arcmin | ≤16 | ≤16 | ≤16 | ≤16 | ≤16 | |
| L2 | arcmin | ≤20 | ≤20 | ≤20 | ≤20 | ≤20 | ||
| Moment Of Inertia Table | L1 | 3 | Kg*cm2 | 0.46 | 0.77 | 1.73 | 12.78 | 36.72 |
| 4 | Kg*cm2 | 0.46 | 0.77 | 1.73 | 12.78 | 36.72 | ||
| 5 | Kg*cm2 | 0.46 | 0.77 | 1.73 | 12.78 | 36.72 | ||
| 7 | Kg*cm2 | 0.41 | 0.65 | 1.42 | 11.38 | 34.02 | ||
| 10 | Kg*cm2 | 0.41 | 0.65 | 1.42 | 11.38 | 34.02 | ||
| L2 | 12 | Kg*cm2 | 0.44 | 0.72 | 1.49 | 12.18 | 34.24 | |
| 15 | Kg*cm2 | 0.44 | 0.72 | 1.49 | 12.18 | 34.24 | ||
| 16 | Kg*cm2 | 0.72 | 0.72 | 1.49 | 12.18 | 34.24 | ||
| 20 | Kg*cm2 | 0.44 | 0.72 | 1.49 | 12.18 | 34.24 | ||
| 25 | Kg*cm2 | 0.44 | 0.72 | 1.49 | 12.18 | 34.24 | ||
| 28 | Kg*cm2 | 0.44 | 0.72 | 1.49 | 12.18 | 34.24 | ||
| 30 | Kg*cm2 | 0.44 | 0.72 | 1.49 | 12.18 | 34.24 | ||
| 35 | Kg*cm2 | 0.44 | 0.72 | 1.49 | 12.18 | 34.24 | ||
| 40 | Kg*cm2 | 0.44 | 0.72 | 1.49 | 12.18 | 34.24 | ||
| 50 | Kg*cm2 | 0.34 | 0.58 | 1.25 | 11.48 | 34.02 | ||
| 70 | Kg*cm2 | 0.34 | 0.58 | 1.25 | 11.48 | 34.02 | ||
| 100 | Kg*cm2 | 0.34 | 0.58 | 1.25 | 11.48 | 34.02 | ||
| Technical Parameter | Level | Ratio | PRN60 | PRN80 | PRN90 | PRN120 | PRN160 | |
| Rated Torque | L1 | 3 | Nm | 27 | 50 | 96 | 161 | 364 |
| 4 | Nm | 40 | 90 | 122 | 210 | 423 | ||
| 5 | Nm | 40 | 90 | 122 | 210 | 423 | ||
| 7 | Nm | 34 | 48 | 95 | 170 | 358 | ||
| 10 | Nm | 16 | 22 | 56 | 86 | 210 | ||
| L2 | 12 | Nm | 27 | 50 | 96 | 161 | 364 | |
| 15 | Nm | 27 | 50 | 96 | 161 | 364 | ||
| 16 | Nm | 40 | 90 | 122 | 210 | 423 | ||
| 20 | Nm | 40 | 90 | 122 | 210 | 423 | ||
| 25 | Nm | 40 | 90 | 122 | 210 | 423 | ||
| 28 | Nm | 40 | 90 | 122 | 210 | 423 | ||
| 30 | Nm | 27 | 50 | 96 | 161 | 364 | ||
| 35 | Nm | 40 | 90 | 122 | 210 | 423 | ||
| 40 | Nm | 40 | 90 | 122 | 210 | 423 | ||
| 50 | Nm | 40 | 90 | 122 | 210 | 423 | ||
| 70 | Nm | 34 | 48 | 95 | 170 | 358 | ||
| 100 | Nm | 16 | 22 | 56 | 86 | 210 | ||
| Degree Of Protection | IP65 | |||||||
| Operation Temprature | ºC | – 10ºC to -90ºC | ||||||
| Weight | L1 | kg | 0.95 | 2.27 | 3.06 | 6.93 | 15.5 | |
| L2 | kg | 1.2 | 2.8 | 3.86 | 8.98 | 17 | ||
Company Profile
FAQ
1. who are we?
Hefa Group is based in ZheJiang , China, start from 1998,has a 3 subsidiaries in total.The Main Products is planetary gearbox,timing belt pulley, helical gear,spur gear,gear rack,gear ring,chain wheel,hollow rotating platform,module,etc
2. how can we guarantee quality?
Always a pre-production sample before mass production;
Always final Inspection before shipment;
3. how to choose the suitable planetary gearbox?
First of all,we need you to be able to provide relevant parameters.If you have a motor drawing,it will let us recommend a suitable gearbox for you faster.If not,we hope you can provide the following motor parameters:output speed,output torque,voltage,current,ip,noise,operating conditions,motor size and power,etc
4. why should you buy from us not from other suppliers?
We are 22 years experiences manufacturer on making the gears, specializing in manufacturing all kinds of spur/bevel/helical gear, grinding gear, gear shaft, timing pulley, rack, planetary gear reducer, timing belt and such transmission gear parts
5. what services can we provide?
Accepted Delivery Terms: Fedex,DHL,UPS;
Accepted Payment Currency:USD,EUR,HKD,GBP,CNY;
Accepted Payment Type: T/T,L/C,PayPal,Western Union;
Language Spoken:English,Chinese,Japanese
/* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1
| Application: | Motor, Motorcycle, Machinery, Marine, Agricultural Machinery, Textile Machinery |
|---|---|
| Function: | Change Drive Direction, Speed Changing, Speed Reduction |
| Layout: | Coaxial |
| Hardness: | Hardened Tooth Surface |
| Installation: | Vertical Type |
| Step: | Single-Step |
| Samples: |
US$ 292/Piece
1 Piece(Min.Order) | |
|---|
| Customization: |
Available
| Customized Request |
|---|
Contribution of Speed Reducer Gearboxes to Energy Efficiency in Machinery
Speed reducer gearboxes play a significant role in enhancing energy efficiency across various industrial applications. Their contributions are as follows:
- Optimized Power Transmission: Speed reducer gearboxes efficiently transfer power from input to output shafts, ensuring minimal energy loss during transmission. By reducing unnecessary friction and minimizing internal losses, these gearboxes maximize power delivery to the intended machinery.
- Torque Amplification: Speed reducers increase torque while reducing rotational speed. This allows larger loads to be moved with less power input, resulting in improved efficiency and reduced energy consumption.
- Variable Speed Control: Some speed reducer gearboxes offer adjustable speed settings, enabling machinery to operate at the most energy-efficient speed for a given task. This feature is especially beneficial in applications with varying load requirements.
- Optimized Motion Profiles: Speed reducer gearboxes help achieve smoother and controlled motion in machinery. By minimizing jerky movements and vibrations, energy waste due to sudden accelerations and decelerations is reduced.
- Reduced Heat Generation: Efficient speed reduction leads to lower heat generation within gearboxes, resulting in decreased energy loss due to heat dissipation. This is particularly important in applications that involve continuous operation.
- Mechanical Advantage: Speed reducers provide mechanical advantage, allowing equipment to perform tasks more easily and efficiently. This can lead to decreased wear and tear on machinery components and, consequently, reduced energy consumption.
Overall, speed reducer gearboxes contribute to energy efficiency by optimizing power transmission, reducing losses, enhancing torque delivery, and enabling precise control over machinery speed and motion. Their inclusion in various industrial setups helps lower energy consumption, operational costs, and environmental impact.
Impact of Gear Ratios on Performance of Speed Reducer Gearboxes
Gear ratios in speed reducer gearboxes play a crucial role in determining their performance characteristics and capabilities. The gear ratio represents the ratio of the number of teeth on the driving (input) gear to the number of teeth on the driven (output) gear within the gearbox. This ratio directly affects how the gearbox transforms the input speed and torque into the desired output speed and torque.
Speed Reduction: A higher gear ratio in a speed reducer gearbox results in greater speed reduction. In this case, the input shaft’s higher rotational speed is converted into a lower rotational speed at the output shaft. This is advantageous for applications that require increased torque and reduced speed, such as heavy-duty machinery and conveyor systems.
Speed Increase: Conversely, a lower gear ratio in a speed reducer gearbox leads to speed increase. The input shaft’s rotational speed is transformed into a higher rotational speed at the output shaft, albeit with decreased torque. This configuration is useful in applications where higher speed is necessary, such as certain types of pumps and fans.
The choice of gear ratio is a critical design consideration when selecting a speed reducer gearbox for a specific application. It determines the trade-off between speed and torque, allowing engineers to tailor the gearbox’s performance to match the requirements of the machinery and equipment it will drive.
Handling Variations in Input and Output Speeds with Speed Reducer Gearboxes
Speed reducer gearboxes are designed to efficiently handle variations in input and output speeds, ensuring that mechanical systems can operate at desired levels of torque and rotational motion. Here’s how they accomplish this:
Versatile Gear Ratios: Speed reducer gearboxes are equipped with a combination of gears, typically including multiple stages of gear reduction. Each stage contains gears with specific gear ratios. By strategically selecting gear ratios for each stage, the gearbox can adjust the speed and torque output according to the input from the motor or initial power source.
Multi-Stage Reduction: In many speed reducer gearboxes, the input shaft connects to a series of gears, each progressively smaller in size. As the input gear turns, it drives the next gear in the sequence. This process continues through multiple stages, resulting in a significant reduction in rotational speed while increasing torque output.
Helical and Planetary Gears: Some speed reducer gearboxes use helical gears or planetary gear sets. Helical gears have angled teeth that engage gradually, reducing noise and providing smoother transitions between gears. Planetary gears consist of a central sun gear, multiple planet gears, and an outer ring gear. They allow for compact designs and efficient speed reduction.
Frictional and Mechanical Efficiency: Speed reducer gearboxes are designed to minimize friction and mechanical losses during operation. High-quality materials, precision manufacturing, and proper lubrication contribute to higher efficiency and reduced energy waste.
Adjustable Configurations: Speed reducer gearboxes can be configured to achieve different output speeds and torque levels based on the specific requirements of the application. This adjustability allows for customization and fine-tuning of performance.
Torque and Speed Ratings: Manufacturers provide torque and speed ratings for their speed reducer gearboxes, indicating the maximum torque load they can handle while maintaining specified speed reductions. These ratings guide the selection of an appropriate gearbox for a given application.
Overall, speed reducer gearboxes effectively manage variations in input and output speeds through the use of gear ratios, multi-stage reduction, specialized gear designs, and careful engineering. This enables them to adapt to the changing demands of mechanical systems while providing precise control over motion and torque.
editor by CX 2024-05-13
China OEM CZPT High Torque Speed Planetary Gear Reducer Motor Gearbox for Texitle Machine synchromesh gearbox
Product Description
PRN120 CHINAMFG High Torque Speed Planetary Gear Reducer Motor Gearbox For Texitle Machine
Planetary gearbox is a kind of reducer with wide versatility. The inner gear adopts low carbon alloy steel carburizing quenching and grinding or nitriding process. Planetary gearbox has the characteristics of small structure size, large output torque, high speed ratio, high efficiency, safe and reliable performance, etc. The inner gear of the planetary gearbox can be divided into spur gear and helical gear. Customers can choose the right precision reducer according to the needs of the application.
Product Parameters
Characteristics:
1.Output threaded connection, standard installation,universal usage;
2.Single cantilever structure.simple design,economic price;
3.Working steady. Low noise;
4.Round flange output,threaded reverse connection,standardized size;
5.Keyway can be opened in the force shaft;
6.The output connection specifications are complete and there are many choices;
7.Low backlash. Can suit most occasion;
8.Speed ratio range:3-100;
9.Precision range:8-16arcmin;
10.Size range:60-160mm.
| Specifications | PRN60 | PRN80 | PRN90 | PRN120 | PRN160 | |||
| Technal Parameters | ||||||||
| Max. Torque | Nm | 1.5times rated torque | ||||||
| Emergency Stop Torque | Nm | 2.5times rated torque | ||||||
| Max. Radial Load | N | 240 | 400 | 450 | 1240 | 2250 | ||
| Max. Axial Load | N | 220 | 420 | 430 | 1000 | 1500 | ||
| Torsional Rigidity | Nm/arcmin | 1.8 | 4.7 | 4.85 | 11 | 35 | ||
| Max.Input Speed | rpm | 8000 | 6000 | 6000 | 6000 | 4000 | ||
| Rated Input Speed | rpm | 4000 | 3500 | 3500 | 3500 | 3000 | ||
| Noise | dB | ≤58 | ≤60 | ≤60 | ≤65 | ≤70 | ||
| Average Life Time | h | 20000 | ||||||
| Efficiency Of Full Load | % | L1≥96% L2≥94% | ||||||
| Return Backlash | P1 | L1 | arcmin | ≤8 | ≤8 | ≤8 | ≤8 | ≤8 |
| L2 | arcmin | ≤12 | ≤12 | ≤12 | ≤12 | ≤12 | ||
| P2 | L1 | arcmin | ≤16 | ≤16 | ≤16 | ≤16 | ≤16 | |
| L2 | arcmin | ≤20 | ≤20 | ≤20 | ≤20 | ≤20 | ||
| Moment Of Inertia Table | L1 | 3 | Kg*cm2 | 0.46 | 0.77 | 1.73 | 12.78 | 36.72 |
| 4 | Kg*cm2 | 0.46 | 0.77 | 1.73 | 12.78 | 36.72 | ||
| 5 | Kg*cm2 | 0.46 | 0.77 | 1.73 | 12.78 | 36.72 | ||
| 7 | Kg*cm2 | 0.41 | 0.65 | 1.42 | 11.38 | 34.02 | ||
| 10 | Kg*cm2 | 0.41 | 0.65 | 1.42 | 11.38 | 34.02 | ||
| L2 | 12 | Kg*cm2 | 0.44 | 0.72 | 1.49 | 12.18 | 34.24 | |
| 15 | Kg*cm2 | 0.44 | 0.72 | 1.49 | 12.18 | 34.24 | ||
| 16 | Kg*cm2 | 0.72 | 0.72 | 1.49 | 12.18 | 34.24 | ||
| 20 | Kg*cm2 | 0.44 | 0.72 | 1.49 | 12.18 | 34.24 | ||
| 25 | Kg*cm2 | 0.44 | 0.72 | 1.49 | 12.18 | 34.24 | ||
| 28 | Kg*cm2 | 0.44 | 0.72 | 1.49 | 12.18 | 34.24 | ||
| 30 | Kg*cm2 | 0.44 | 0.72 | 1.49 | 12.18 | 34.24 | ||
| 35 | Kg*cm2 | 0.44 | 0.72 | 1.49 | 12.18 | 34.24 | ||
| 40 | Kg*cm2 | 0.44 | 0.72 | 1.49 | 12.18 | 34.24 | ||
| 50 | Kg*cm2 | 0.34 | 0.58 | 1.25 | 11.48 | 34.02 | ||
| 70 | Kg*cm2 | 0.34 | 0.58 | 1.25 | 11.48 | 34.02 | ||
| 100 | Kg*cm2 | 0.34 | 0.58 | 1.25 | 11.48 | 34.02 | ||
| Technical Parameter | Level | Ratio | PRN60 | PRN80 | PRN90 | PRN120 | PRN160 | |
| Rated Torque | L1 | 3 | Nm | 27 | 50 | 96 | 161 | 364 |
| 4 | Nm | 40 | 90 | 122 | 210 | 423 | ||
| 5 | Nm | 40 | 90 | 122 | 210 | 423 | ||
| 7 | Nm | 34 | 48 | 95 | 170 | 358 | ||
| 10 | Nm | 16 | 22 | 56 | 86 | 210 | ||
| L2 | 12 | Nm | 27 | 50 | 96 | 161 | 364 | |
| 15 | Nm | 27 | 50 | 96 | 161 | 364 | ||
| 16 | Nm | 40 | 90 | 122 | 210 | 423 | ||
| 20 | Nm | 40 | 90 | 122 | 210 | 423 | ||
| 25 | Nm | 40 | 90 | 122 | 210 | 423 | ||
| 28 | Nm | 40 | 90 | 122 | 210 | 423 | ||
| 30 | Nm | 27 | 50 | 96 | 161 | 364 | ||
| 35 | Nm | 40 | 90 | 122 | 210 | 423 | ||
| 40 | Nm | 40 | 90 | 122 | 210 | 423 | ||
| 50 | Nm | 40 | 90 | 122 | 210 | 423 | ||
| 70 | Nm | 34 | 48 | 95 | 170 | 358 | ||
| 100 | Nm | 16 | 22 | 56 | 86 | 210 | ||
| Degree Of Protection | IP65 | |||||||
| Operation Temprature | ºC | – 10ºC to -90ºC | ||||||
| Weight | L1 | kg | 0.95 | 2.27 | 3.06 | 6.93 | 15.5 | |
| L2 | kg | 1.2 | 2.8 | 3.86 | 8.98 | 17 | ||
Company Profile
FAQ
1. who are we?
Hefa Group is based in ZheJiang , China, start from 1998,has a 3 subsidiaries in total.The Main Products is planetary gearbox,timing belt pulley, helical gear,spur gear,gear rack,gear ring,chain wheel,hollow rotating platform,module,etc
2. how can we guarantee quality?
Always a pre-production sample before mass production;
Always final Inspection before shipment;
3. how to choose the suitable planetary gearbox?
First of all,we need you to be able to provide relevant parameters.If you have a motor drawing,it will let us recommend a suitable gearbox for you faster.If not,we hope you can provide the following motor parameters:output speed,output torque,voltage,current,ip,noise,operating conditions,motor size and power,etc
4. why should you buy from us not from other suppliers?
We are 22 years experiences manufacturer on making the gears, specializing in manufacturing all kinds of spur/bevel/helical gear, grinding gear, gear shaft, timing pulley, rack, planetary gear reducer, timing belt and such transmission gear parts
5. what services can we provide?
Accepted Delivery Terms: Fedex,DHL,UPS;
Accepted Payment Currency:USD,EUR,HKD,GBP,CNY;
Accepted Payment Type: T/T,L/C,PayPal,Western Union;
Language Spoken:English,Chinese,Japanese
/* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1
| Application: | Motor, Motorcycle, Machinery, Marine, Agricultural Machinery, Textile Machinery |
|---|---|
| Function: | Change Drive Direction, Speed Changing, Speed Reduction |
| Layout: | Coaxial |
| Hardness: | Hardened Tooth Surface |
| Installation: | Vertical Type |
| Step: | Single-Step |
| Samples: |
US$ 292/Piece
1 Piece(Min.Order) | |
|---|
| Customization: |
Available
| Customized Request |
|---|
Considerations for Choosing Lubrication for Speed Reducer Gearboxes
Choosing the right lubrication for speed reducer gearboxes is crucial to ensure optimal performance, longevity, and efficiency. Several factors should be taken into account when making this decision:
- Operating Conditions: Consider the temperature range, load, and speed at which the gearbox operates. Extreme temperatures or heavy loads may require specialized lubricants.
- Lubricant Type: Choose between oil and grease lubrication. Oil provides better heat dissipation and is suitable for high-speed applications, while grease offers better sealing and is ideal for applications with frequent starts and stops.
- Viscosity: Select the appropriate viscosity grade of lubricant based on the operating conditions. Higher viscosity is generally preferred for heavy loads and high temperatures.
- Additives: Some applications may require lubricants with specific additives, such as anti-wear additives, extreme pressure additives, or corrosion inhibitors, to enhance performance and protection.
- Sealing and Contamination: Consider the effectiveness of sealing mechanisms to prevent contamination from dust, water, and other particles. Proper sealing helps extend the lubricant’s lifespan.
- Compatibility: Ensure that the selected lubricant is compatible with the materials used in the gearbox construction, including seals, gaskets, and gear materials.
- Re-Lubrication Intervals: Determine how frequently re-lubrication is required. Some applications may demand frequent re-lubrication, while others can operate with longer intervals.
- Environmental Impact: Consider environmental regulations and restrictions when selecting lubricants to minimize ecological impact and ensure compliance.
By carefully evaluating these factors and consulting with lubrication experts, industries can choose the right lubrication strategy for their speed reducer gearboxes, promoting smooth operation and extending the equipment’s service life.
Factors to Consider When Selecting the Right Speed Reducer Gearbox
Choosing the appropriate speed reducer gearbox for an application involves considering several key factors to ensure optimal performance and efficiency. Here are the factors to take into account:
Torque and Speed Requirements: Determine the required torque output and speed reduction or increase for your specific application. Select a gearbox that can handle the desired torque and provide the necessary speed output.
Ratio: The gear ratio determines the relationship between input and output speeds. Choose a gearbox with the appropriate gear ratio to achieve the desired speed reduction or increase.
Efficiency: Consider the efficiency of the gearbox, as higher efficiency results in less energy loss and heat generation. Choose a gearbox with a high efficiency rating for improved energy savings.
Load Type: Identify whether the application involves constant, intermittent, or shock loads. Different gearbox designs are better suited for specific load types.
Space and Mounting Constraints: Evaluate the available space for installing the gearbox and ensure that the selected design fits within the allotted area. Consider mounting options and alignment requirements.
Environmental Conditions: Take into account factors such as temperature, humidity, dust, and corrosive environments. Choose a gearbox with appropriate sealing and protection to withstand the operating conditions.
Service Life and Maintenance: Consider the expected service life of the gearbox and its maintenance requirements. Select a gearbox with durable components and minimal maintenance needs.
Backlash: Backlash refers to the amount of play or clearance between gear teeth. Depending on the application’s precision requirements, choose a gearbox with low backlash for accurate motion control.
Noise and Vibration: Some applications require low noise and vibration levels. Choose a gearbox with features to minimize noise and vibration if necessary.
Cost: Factor in the cost of the gearbox and its long-term operational expenses. Balance the initial investment with the expected benefits and performance improvements.
Compatibility: Ensure that the gearbox is compatible with the existing components and systems in your application.
Manufacturer and Supplier: Choose a reputable manufacturer or supplier with a track record of delivering high-quality, reliable gearboxes.
By carefully considering these factors, you can select the right speed reducer gearbox that meets the specific requirements of your application, ensuring efficient and reliable operation.
How do Speed Reducer Gearboxes Contribute to Reducing Rotational Speed and Increasing Torque?
Speed reducer gearboxes play a critical role in mechanical systems by achieving the dual objectives of reducing rotational speed and increasing torque. This fundamental function is accomplished through the intricate interaction of different types of gears within the gearbox.
At its core, a speed reducer gearbox consists of multiple gears with varying sizes and configurations. The gears are arranged in specific sequences to create gear trains that manipulate the input speed and torque to achieve the desired output characteristics.
The reduction of rotational speed is achieved through gear train arrangements that involve gear pairs with different numbers of teeth, commonly known as gear ratios. When an input shaft connected to a higher-speed power source engages with a gear of smaller size, it drives a larger gear connected to the output shaft. This gear reduction process results in a lower rotational speed at the output shaft compared to the input shaft. The change in gear size and ratio effectively converts the input speed into a reduced output speed.
Simultaneously, the interaction of gears in the speed reducer gearbox leads to an increase in torque. As the input torque is distributed across the gear train, the larger gear driven by the smaller gear experiences a higher force at its teeth. This force is transmitted through the gears, leading to a torque amplification at the output shaft. In other words, the output torque is greater than the input torque due to the mechanical advantage gained from the gear arrangement.
The combination of gear reduction and torque amplification allows speed reducer gearboxes to match the requirements of various applications. Industries such as manufacturing, material handling, automotive, and robotics benefit from this functionality. For instance, in conveyor systems, the gearbox reduces the high-speed motor rotation to a suitable speed for smoothly transporting materials, all while providing the necessary torque to handle loads efficiently.
In summary, speed reducer gearboxes utilize gear ratios and interactions to effectively lower rotational speed while increasing torque. This capability is instrumental in optimizing the performance of mechanical systems across diverse industrial sectors.
editor by CX 2024-05-10
China best High Torque 22mm Planetary Mechanel Gearbox Speed Reducer with Best Sales
Product Description
We are a factory specialized in metal parts hardware & metal gearbox geared motor through powder metallurgy process .We services with ODM/OEM gearbox design and development , gearmotors manufacture.
Custom planetary gears .
A planetary gearbox is a gearbox with the input shaft and output shaft aligned it offers high torque transmission with good stiffness and low noise , in a more compact foot print than other gearbox types . It can supply a lot of speed reduction and torque in a small package with the fixed axis .Gearbox is ensure that it provides highly accurate gear engagement, smooth running and minimum noise and give the ability to increase the torque and lower the speed of an electric motor.
Since the torque transmitted by the sun gear is equally distributed among planetary gears (3-5 gears), the load applied to each gear is small, realizing a compact and lightweight planetary gear reducer. The 5-gear planetary system is made possible due to our original carrier.
Description:
Product Name : 22mm low speed high torque geared motor / Speed reducer / steel gearbox,powder transmission gear ,speed reducer
Gearbox Type: Planetary
Material: Steel
Gear backlash: ≤2°
Bearing:Porous Bearing ,Rolling bearing
Radial loading on output shaft:≤ 30 N
Gear Ratio : 5:1 , 10:1 , 20:1 , 25:1 , 30:1 , 40:1 , 50:1 , 60:1 ,70:1…100:1… optional
Gearbox diameter : 8mm , 12mm , 16mm , 22mm , 24mm ,28mm, 32mm ,36mm, 38mm , 42mm , 48mm ……
3V , 6V ,12V ,24V available .
High Torque Brushed/Brushless/Stepper/AC Motor Usage Planetary Gearbox/Gear Reducer.
Planetary Gearbox advantages:
- Provides high torque at slow speeds .
- The shafts are made up of hardened and tempered alloy steel .
- Sun gears ,planet gears and ring gears are made of powder metallurgy and sintering steel .
- Low noise levels.
- Good quality taper roller bearings for input and output shafts .
- High efficiency .
- Increased repeatability . Its Its greater speed radial and axial load offers reliability and robustness, minimizing the misalignment of the gear. In addition, uniform transmission and low vibrations at different loads provide a perfect repeatability.
- Perfect precision: Most rotating angular stability improves the accuracy and reliability of the movement.
- Lower noise level because there is more surface contact. Rolling is much softer and jumps are virtually nonexistent.
- Greater durability: Due to its torsional rigidity and better rolling. To improve this feature, your bearings help reduce the losses that would occur by rubbing the shaft on the box directly. Thus, greater efficiency of the gear and a much smoother operation is achieved.
- Increased torque transmission: With more teeth in contact, the mechanism is able to transmit and withstand more torque. In addition, it does it in a more uniform manner.
- Very good levels of efficiency: Planetary reducers offer greater efficiency and thanks to its design and internal layout losses are minimized during their work. In fact, today, this type of drive mechanisms are those that offer greater efficiency.
- Maximum versatility: Its mechanism is contained in a cylindrical gearbox, which can be installed in almost any space.
Application:
monitor,automatic vending machine,automatic cruise control,door lock actuator, retractable rearview mirror, meters, optic axis control device, head light beam level adjuster,printers,conditioning damper actuator,Car tail gate electric putter,tooth brush,vibrator, sanitary ware,coffee machine,Sweeping robot,toys etc.
Custom geared motors , planet gears , metal gearbox
Welcome OEM ODM projects .
Encoder available
Workshop
/* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1
| Application: | Motor, Electric Cars, Motorcycle, Machinery, Marine, Toy, Agricultural Machinery, Car |
|---|---|
| Hardness: | Hardened Tooth Surface |
| Installation: | Vertical Type |
| Layout: | Coaxial |
| Gear Shape: | Cylindrical Gear |
| Step: | Double-Step |
| Samples: |
US$ 10/Piece
1 Piece(Min.Order) | |
|---|
| Customization: |
Available
| Customized Request |
|---|
editor by CX 2024-05-08
China Standard K Series High Torque Low Rpm Helical Bevel Electric Motor Speed Gearbox with High Efficiency cvt gearbox
Product Description
Technical data:
Product Description
-K Series Helical Bevel Gearbox
K series gear reducer, manufactured according to international technical requirements, has a high scientific and technological content; Space saving, reliable and durable, high overload capacity, power up to 132KW; Low energy consumption, superior performance, reducer efficiency up to 95%
It is designed and manufactured on the basis of module combination system. There are a lot of motor combinations, installation forms and structural schemes. The transmission ratio is classified carefully to meet different operating conditions and realize electromechanical integration.
High transmission efficiency, low energy consumption and superior performance.
Reinforced high rigid cast iron box; The hardened gear is made of high-quality alloy steel. Its surface is carburized, quenched and hardened, and the gear is finely ground. It features stable transmission, low noise, large bearing capacity, low temperature rise, and long service life. Performance and characteristics:
1. The gear is carburized and quenched with high-quality alloy, the hardness of the tooth surface is up to 60 ± 2hrc, and the grinding accuracy of the tooth surface is up to 5-6
2. The computer modification technology is used to pre modify the gear, which greatly improves the bearing capacity of the reducer
3. Complete modular structure design is adopted from the box to the internal gear, which is suitable for large-scale production and flexible selection
4. The standard reducer models are divided according to the form of decreasing torque. Compared with the traditional equal proportion division, they are more in line with customer requirements and avoid power waste
5. It is designed and manufactured by cad/cam to ensure the stability of quality
6. Multiple sealing structures are adopted to prevent oil leakage
7. Multi directional noise reduction measures to ensure the excellent low noise performance of the reducer
8. The installation mode of Liyi products is flexible, which makes it easy for customers to choose K57 reducer, K67 reducer, K77 reducer, K87 reducer, K97 reducer, KA87 reducer, KA97 reducer, KA107 reducer, KA127 reducer
Our Advantages
/* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1
| Hardness: | Hardened Tooth Surface |
|---|---|
| Installation: | 90 Degree |
| Layout: | Expansion |
| Gear Shape: | Bevel Gear |
| Step: | Single-Step |
| Type: | Gear Reducer |
| Samples: |
US$ 1000/Piece
1 Piece(Min.Order) | |
|---|
editor by CX 2024-04-30